Download and install SMART Board cable SMART Board cable driver SMART Board cable is a USB Universal Serial Bus hardware device. This Windows driver was developed. (24.08 m), you can insert a DB9M/DB9M serial cable between the DB9F-end of the USB adapter cable and a SMART serial/power cable. You’ll also need to connect an external 12V DC power supply to the power socket in the long DB9-end of the serial/power cable to provide sufficient power for the Pen Tray. The DB9M/DB9M serial cable must be a.

SMART hardware SMART Board 600 and D600 series interactive whiteboards Overview Your SMART Board 600 or D600 series interactive whiteboard includes a 16' (5 m) USB cable (Part No. If this cable isn’t long enough to connect your interactive whiteboard to your computer, you can extend the connection. Details There are four ways to extend the USB connection: • Option 1: Use up to four active USB extender cables (Part No.

This isn’t a plenum-rated solution. • Option 2: Use a Cat 5 to USB extender (Part No. CAT5-XT) with plenum-rated cable, as required. Bomberman Psp Games Iso on this page.

• Option 3: Use an RS-232 Serial Connection option (Part No. RS232-XX) with your interactive whiteboard and connect it to your computer with up to 100' (30.5 m) of serial data cable.

• Option 4: Use the Wireless Bluetooth Connection option (Part No. WC6 or WC6D) to eliminate connection cables. For help diagnosing connection issues using the status LEDs, see. Note Don’t use passive USB A plug to USB A receptacle extension cables. The included 16' (5 m) USB cable meets USB maximum length specifications. Serial Do Digitando 2007 Vers O Escolas there. Extending these cables with a passive extension will cause the total cable length to exceed USB specifications.

Option 1: Use up to four active USB extension cables (Part No. USB-XT) You can use up to four active USB extension cables, such as the USB-XT extender, to extend the 16' (5 m) cable included with your SMART Board 600 or D600 series interactive whiteboard to a total length of 80' (25 m). For more information, see.

This isn’t a plenum-rated solution, and so it isn’t generally recommended for ceiling spaces or in-wall wiring. Reference your local building and fire safety codes for specific requirements about plenum-rated cables. Caution Do not use more than four USB hubs (or active extenders, which have the same properties as hubs) to extend the 16' (5 m) USB cable. USB specifications allow up to five hubs in a circuit, with your computer’s USB interface acting as one of the hubs.

Verifying power to SMART Board 600 or D600 series interactive whiteboards After you extend the USB cable, verify that your interactive whiteboard is receiving sufficient power and that it’s working properly. To check the interactive whiteboard’s USB voltage • Click the SMART Board icon in the Windows notification area or the Mac Dock, and then select Control Panel. • Click About Software and Product Support >Tools >Diagnostics. The SMART Board Diagnostics window appears showing the log file.

• Find the following text in the log: SMART Board(0x1) - on USB: Voltage USB Power if you have an SC9 controller module or SMART Board (0xB) - on USB: Voltage USB Power if you have an SC9D controller module. If a value between 4.06V and 5.60V appears, the voltage is sufficient to power the interactive whiteboard.

However, if the voltage is less than 4.06V, a USB hub or extender could be faulty, or the USB extension could be too long. Option 2: Use a SMART Cat 5 to USB extender (Part No. CAT5-XT) You can use a SMART Cat 5 to USB extender (Part No. CAT5-XT) to connect your SMART Board interactive whiteboard to your computer. This USB 1.1 extension system consists of a local extender (Unit B) and a remote extender (Unit A), and supports full-speed (12 Mbps) and low-speed (1.5 Mbps) USB devices. You can use up to 120' (36.6 m) of Cat 5 cable with Windows computers, or up to 90' (27.5 m) with Mac computers.